1 HEAD
2 HEADS
3 HEADS
4 HEADS
|
|
- This machine is especially designed to drill two holes at time. The bedplate is pressed steel. The main bead unit is in cast aluminium.
- The drilling movement is manual by the use of a handle which is acting on a rack and gear with parts running on machined guides.
- The drilling heads are adjustable in order to have the drills at the same level. A tooth belt and a drive motor assist the drive of the drilling heads.
- The VENUS is equipped with a tabulator for the execution of multiple hole drilling and with a system for waste collection.
- It is possible to equip every VENUS model with a sliding table. In this case the machine codes become the following:
220/TM, 225/TM, 230/TM, 235/TM.
| WORKING TABLE SIZE | 65 x 35 cm. - 20' 9/16 x 14' |
| MOTOR POWER | HP 0.75 |
| POWER SUPPLY | 220 V - 380 V 3 fasi |
| DRILLIG DEPTH | 80 mm. - 3' ½ |
| MINIMUM DISTANCE BETWEEN HOLES | 45 mm. - 1' ¾ |
| MAXIMUM DISTANCE BETWEEN HOLES | 115 mm. - 4' 5/8 |
| DRILLING MAXIMUM THICKNESS | 50 mm. |
| DRILLING CAPACITY | Diam. 3 - 14 mm. |
| PACKING SIZES | 81 x 77 x 69 cm. |
| NET WEIGHT | 56 Kg. |
| GROSS WEIGHT | 82 Kg. |
|
|
Zoom photo