1 HEAD
2 HEADS
3 HEADS
4 HEADS
|
|
|
SUPERVENUS - Art. 0235
Motorized base model with speed controls
 Zoom photo
|
|
- This machine is especially designed to drill two holes at time. The bedplate is pressed steel. The main bead unit is in cast aluminium. The drilling movement is manual by the use of a handle which is acting on a rack and gear with parts running on machined guides. The drilling heads are adjustable in order to have the drills at the same level. A tooth belt and a drive motor assist the drive of the drilling heads.
- The VENUS is equipped with a tabulator for the execution of multiple hole drilling and with a system for waste collection.
- The features are the same as the model VENUS 3, with the addition of a drill sharpness control unit and head decent speed regulator. These features allow the operator to obtain the ideal speed for drilling all materials including plastic, coated papers, board, etc. optional extras - it is possible to equip every VENUS model with a sliding table. In this case the machine codes become the following: 220/TM, 225/TM, 230/TM, 235/TM.
| WORKING TABLE SIZE | 65 x 35 cm. - 20' 9/16 x 14' |
| MOTOR POWER | 2 x HP 0.75 |
| ELECTRICAL CONNECTIONS | 220 V |
| DRILLING DEPTH | 80 mm. - 3' ½ |
| MINIMUM DISTANCE between holes | 45 mm. - 1' ¾ |
| MAXIMUM DISTANCE between holes | 115 mm. - 4' 5/8 |
| DRILLING THICKNESS | 50 mm. |
| DRILLING CAPACITY | Diam. 3 - 14 mm. |
| PACKING SIZES | 89 x 79 x 173 cm. |
| NET WEIGHT | 145 Kg. |
| GROSS WEIGHT | 181 Kg. |
|
|
Zoom photo