1 HEAD
2 HEADS
3 HEADS
4 HEADS
|
|
|
SKYLAB 3 - Art. 0440
Motorized base model
Zoom photo
|
|
- This machine is especially designed to drill three holes at time. The bedplate is pressed steel. The main bead unit is in cast aluminium. The drilling movement is manual by the use of a handle which is acting on a rack and gear with parts running on machined guides. The drilling heads are adjustable in order to have the drills at the same level. A tooth belt and a drive motor assist the drive of the drilling heads.
- The SKYLAB is equipped with a tabulator for the execution of multiple hole drilling and with a system for waste collection.
- SKYLAB 3 is the same machine but has a motor operated stand unit. It is not possible to dismantle this stand unit, as it would require skilled staff to reassemble.
- It is possible to equip every SKYLAB model with a sliding table. In this case the machine codes become the following:
430/TM, 435/TM, 440/TM, 445/TM.
| WORKING TABLE SIZE | 65 x 35 cm. - 20' 9/16 x 14' |
| MOTOR POWER | 2 x HP 1 |
| ELECTRICAL CONNECTIONS | 220 V - 380 V 3 fasi |
| DRILLIG DEPTH | 80 mm. - 3' ½ |
| MINIMUM DISTANCE between holes | 45 mm. - 1' ¾ |
| MAXIMUM DISTANCE between holes | 240 mm. - 9' ½ |
| DRILLING THICKNESS | 50 mm. |
| DRILLING CAPACITY | Diam. 3 - 14 mm. |
| PACKING SIZES | 89 x 79 x 173 cm. |
| NET WEIGHT | 153 Kg. |
| GROSS WEIGHT | 189 Kg. |
|
|
Zoom photo