1 HEAD
2 HEADS
3 HEADS
4 HEADS
|
|
- This model is manufactured for the multiple hole punching of booklets and its strong structure allows a quick, exact and constant punch. The tool-holder heads are specifically designed for supporting strong stresses and are fixed on bearings; however heads are separately adjustable in height so that it is possible to zero the drill bits in respect of the working table. They can be approached and moved away from a minimum distance of 45 mm up to a maximum of 400 mm.
- The machine is equipped with three motors for different operations: drills rotation, drills descent, and suction of paper-waste.
- The paper-waste is collected into a container that must be emptied periodically.
- The machine is fitted with graduated side-gauge and back-gauge assuring a perfect line up. The side-gauge is placed on the tabulator for the execution of multiple hole drilling.
- A sliding table can be fitted on the machine: in this case the model is 155/TM. Is also possible to connect the machine to an optional external aspirator with considerable capacity and strong suction.
| WORKING TABLE SIZE | 50 x 90 cm. |
| DRILLS MOTOR POWER | HP 1 |
| DESCENT MOTOR POWER | HP 1 |
| SUCTION MOTOR POWER | HP 0.9 |
| ELECTRICAL CONNECTIONS | 220 V - 380 V 3 fasi |
| DRILLIG DEPTH | 220 mm. |
| MINIMUM DISTANCE between holes | 45 mm. |
| MAXIMUM DISTANCE between holes | 400 mm. |
| DRILLING THICKNESS | 50 mm. |
| DRILLING CAPACITY | Diam. 3 - 14 mm. |
| PACKING SIZES | 117 x 92 x 168 cm. |
| NET WEIGHT | 320 Kg. |
| GROSS WEIGHT | 370 Kg. |
|
|
Zoom photo