-
The
worktable is equipped with two side and one back millimetric adjustable
squares.
-
Two orientable side blowing points.
-
Central
front blowing point with adjustable height and air power.
-
Two
sectors drum with internal suction adjusting on the power and
on the line of suction to the point of tangency moved by a mechanic
pomp.
-
Millimetric regulation of the double sheet through mechanic locking
adjustable horizontally and vertically.
-
Manual
sheet feeding up to 500 mm paper pile and automatic lifting through
an engine.
-
Supplied
with high and low stopping stroke and with automatic lifting and
coming down device controlled by an optical photocell installed
on the central arm to permit the regulation of the different paper
sizes.
-
Maximum
size of sheet up to 500x700 mm. Speed and tension of the dragging
sheet carpet can be set.
-
Micrometric adjustable support square. Speed and tension of the
sheet dragging carpet can be set.
-
The
balls guide regulate the sheet; different types of balls (plastic
or iron balls) are available depending on the paper thickness.
-
The sheet feeder is arranged with electrical connection to other
units for simultaneous processings (creasing, punching and folding).
TECHNICAL DATE:
working width: 500 mm
power supply: 220 V single phase
power consumption:
2700 W
working speed: adjusting to the connected working unit
loading sheet capacity: 500 mm
sheet size: max 50x700 mm
DIMENSIONS:
overall dimensions: 1750x800x1700h mm
weight: 180 kg
Connectable with:
-
-
endevor
Zoom photo